Loading

The REEFER DC Skimmer is operated via the ReefRun Dual Controller, which is sold separately.

The Dual Controller allows you to run both a REEFER DC Skimmer and a ReefRun DC Pump with one device!

Once you’ve purchased a REEFER DC Skimmer and a Dual Controller, you’ve got the ReefRun DC pump covered at a significant saving!

Bundle them up and enjoy a full Reefbeat eco-system experience.

Learn how the ReefBeat eco-system can simplify your reefing routines…

ReefDose
Doser

ReefMat
Roller Filter

ReefRun
DC Pump

REEFER DC
Skimmer

ReefWave
Pump

1. Activate feed mode manually – quick action (Upcoming feeding schedule in Xmin)
2. Turn off skimmer + Reef Run + Reef Dose in case of more than 1 (ATO and RM are disabled by water level rising all at once)
3. Wait X amount of sec\min- allowing water to drain from the display (time depends on tank volume)  
4. Activate feed head on RD\manual feed.
5. Disable reef dose of feeding head.
6. Wait for X min and turn off Reef waves after all the food is mixed 
**bonus** lower RW intensity if possible
7. Gradual return of all the devices Reef Wave, Run, Dose, Skimmer (each can be set to a different time like we have today)

1. Add food to sump
2. Activate feed mode manually – quick action or RD schedule activated.  
3. Turn off skimmer + Reef Dose in case of more than 1 (ATO and RM are disabled by water level rising all at once)
4. Allow Reef Run to stay on for X sec\min to pump all the food to the display.
5. Turn off Reef Run
6. Wait for X min and turn off Reef waves after all the food is mixed 
**bonus** lower RW intensity if possible
7. Gradual return of all the devices Reef Wave, Run, Dose, Skimmer (each can be set to a different time like we have today)

1. Turn on Maintenance mode= Turn off Reef Run and Skimmer disable Reef Dose, ATO, Reef Mat
*Reef Wave optional
2. Pump water out, or clean equipment (whatever needs to be done)
3. Replace the water \ equipment
4. Turn Reef run on
5. Xmin turn RW on
6. Xmin turn skimmer + Reef Dose +Reef Mat on
7. Confirm water level \ corrections
8. Turn ATO on.

1. Turn on Maintenance mode= Turn off Reef Run and Skimmer disable Reef Dose, ATO, Reef Mat
*Reef Wave optional
2. Pump water out, or clean equipment (whatever needs to be done)
3. Replace the water \ equipment
4. Turn Reef run on
5. Xmin turn RW on
6. Xmin turn skimmer + Reef Dose +Reef Mat on
7. Confirm water level \ corrections
8. Turn ATO on.

1. Turn on Maintenance mode= Turn off Reef Run and Skimmer disable Reef Dose, ATO, Reef Mat
*Reef Wave optional
2. Pump water out, or clean equipment (whatever needs to be done)
3. Replace the water \ equipment
4. Turn Reef run on
5. Xmin turn RW on
6. Xmin turn skimmer + Reef Dose +Reef Mat on
7. Confirm water level \ corrections
8. Turn ATO on.

ReefBeat Eco-system

Using the quick action buttons allows you to coordinate all of the ReefBeat eco-system devices for your daily and weekly routines.
Here’s what you can do:
Switch different devices pumps on and off
Make them run at lower intensities