RedSeaFish


	> Homepage
	> New Products



	> Contact Us
	> Offices
	> Product Support
	> Registration
	> Search

CO₂ Pro System

Home / CO₂ / CO₂ Pro

Red Sea is pleased to introduce an exciting new CO2 system for planted aquariums.
The Pro System is a complete, efficient and user-friendly system to maintain a desired level of CO2 in planted aquariums from 10 to 125 gallons (40 to 500 Liters).

The CO2 Pro System contains the following components:

Full featured, dual gauge, safety regulator that is supplied in versions suitable for connection to standard refillable CO2 cylinders, disposable CO2 cylinders and "Paintball” CO2 cylinders (USA only).
Independent, high precision, in-line, needle valve that can be located in a convenient location on the side of the aquarium and be set to stable flow rates as low as 4 bubbles per minute.
Highly efficient CO2 Reactor 500 that includes an adjustable flow water pump and can dissolve over 180 bubbles of CO2 per min
Bubble Counter with integrated check valve
Real time CO2 indicator
Real time CO2 indicator

CO2 Pro System Set Up

Dual gauge pressure regulator
Indipendent needle valve
Bubble counter with intigrated check valve
CO2 reactor 500
Real time CO2 indicator

	CO2 Pressure Regulator: With dual gauges and independent needle valve included Full-featured safety regulator with independent needle valve. Designed specifically for aquarium use, the Pressure Regulator and Needle Valve are independent units connected by low-pressure CO2 tubing. The high precision fine-flow valve is designed to be mounted on the side of the aquarium enabling easy access for regular flow adjustment or complete shut off. Easily upgradeable for automatic control with an in-line solenoid control valve. Easy to read high and low pressure gauges Integral pressure relief valve Independent, fine flow valve Stable flow rates from 4 bubbles per minute

	CO2 Needle Valve: The independent needle valve is designed to be mounted on the side of the aquarium enabling easy access for fine flow adjustment or complete shut off. The CO2 Cylinder / Regulator can be located out of site, behind or under the aquarium. Stable flow rates from 4 bubbles per minute Unique user-friendly mounting & operation

	CO2 Reactor 500: Efficiently dissolves CO2 into aquarium water This fully adjustable, power driven, super compact CO2 reactor will simply and efficiently maintain the desired level of CO2 in a wide range of planted aquariums. The turbulent flow CO2 / water interface inside the reactor ensures almost complete dissolving of available CO2 while non-dissolvable gases are gently vented to the water surface. Highly effective vortex reaction chamber Adjustable flow 250 l/h (65 gal/h) pump Super compact design 9.5 x 4 x 5.5 cm (3.75” x 1.6” x 2.2”) Dissolves CO2 at flow rates of up to 180 bubbles per minute Suitable for planted aquariums 40 to 500 Liters (10 – 125 gal)

	CO2 Control Valve: Solenoid for automating dosing of CO2 Too much CO2 can reduce the pH in an aquarium to levels that are stressful for fish. For the safe use of CO2 it is highly recommended to automate the CO2 system with either a simple time switch or by a pH controller. The in-line solenoid Control Valve connects the CO2 system with either of these devices. Includes both a hose barb with lock nut for in-line connection on the CO2 tubing and a standard 1/8” thread for direct connection to a pressure reducer. Low working temperature Low (2W) power consumption Connects to time switches or pH controllers Suitable for all CO2 systems Easy installation

	CO2 Indicator: Real time CO2 monitor for freshwater aquariums The Red Sea CO2 indicator gives an easy to read, continuous, qualitative visual indication of the current CO2 level in a freshwater aquarium.

	CO2 Bubble Counter: Compact, Easy to use bubble counter with integrated check valve Check valve protects the gas system from backflow of aquarium water. Provides an accurate measurement of the CO2 flow rate